Robotest International

Din Abrasion Tester

This tester is suitable for elastic material, rubber, tires, conveyor belts, transmission belts, shoe soles and software synthetic leather. The specimen of wear area is dia. 16mm which provide the required load and the specimen press on the sand paper wheel. The sand paper #60 will be stick on 150mm of drum. The drum turns one rotary, the specimen will move 4.2mm. The drum is 40rpm rotated speed. When the specimen of wear distance reaches 40M, it will be stop and measure after wear of volume of losses which was based on abrasion characteristics

►  Easy to Install and Operate

►  Highly accurate and excellent performance

►  high efficiency and good reproducibility 

 

Model

DIN Abrasion Tester DAT-150

Weight Set

2.5N- 5N(test load 2.5N, 5N, 7.5N, 10N)

Drum

Diameter150 mm, Perimeter 471mm, Rotary speed 40PRM

Sand Paper

#60 or indicated

Accessories

Sand paper, standard rubber, specimen cutter, Aluminum pre-rub (1 pc), brass brush (1 pc) and driller(1 pc)

Sample movement

4.2 mm / rev

Stroke

40 M

Sample Tilt Angle

3°

Power

Single phase, 100- 240V

Dimension

81 × 32 × 36 cm

Weight

90 kg

DIN53516, ISO-4649, GB/T 9867, SATRA TM174